Inspection example · Aventura
Mold testing in an Aventura condo: what the samples showed
Visible growth and an odor prompted this mold inspection at an Aventura condominium in October 2026. Kerwin Inspections documented the property through field photographs and mold testing. The laboratory report records air samples from a bedroom and a bathroom, plus surface swabs labeled Bedroom 1 and HVAC.
- Location
- Aventura, Florida
- Property type
- Condominium
- Inspection month
- October 2026
- Service
- Mold testing with indoor air samples and surface swabs
The results differed by location and sample type. The bedroom air sample received a different laboratory classification from the bathroom air sample. A separate bedroom surface swab also showed a growth finding. That distinction matters: an air sample and a surface swab do not answer exactly the same question.
What the laboratory reported
The following classifications are the laboratory’s descriptions of the submitted samples—not a government pass/fail rating for the property.
- Bedroom 1 air sample: Classified as NORMAL, with a reported total airborne spore concentration of 980 spores per cubic meter of air.
- Bathroom air sample: Classified as PROBLEM, with a reported total of 1,700 spores per cubic meter of air. The laboratory’s grouped identification Penicillium/Aspergillus accounted for 86% of the reported total, at 1,508 spores per cubic meter. The grouped name does not identify a particular species.
- Bedroom 1 surface swab: Classified as GROWTH.
- HVAC surface swab: Classified as GROWTH. The report labels the location as HVAC; it does not specify a particular coil, vent, duct or other component.
For the surface swabs, the laboratory describes its growth finding as current or former mold growth observed. That finding does not, by itself, establish that growth was still active when the property was inspected.
Photographs from this inspection


What we recommended
We recommended remediation and referred the customer to a remediation company for cleaning. This example documents our inspection findings and recommendation; it does not document completed remediation or a follow-up clearance test.
What these findings do—and do not—tell you
The bedroom air result should not be read as proof that the bedroom or the entire property was mold-free. In this inspection, the bedroom air sample and the separate bedroom surface swab received different laboratory classifications. The results apply to the samples analyzed, not every surface or every moment in the building.
There are no EPA federal limits for airborne mold concentrations, so these results are not a test of compliance with a federal mold standard. NIOSH also cautions that short-term spore counts cannot be interpreted as a measure of health risk. This example is not a medical diagnosis or a statement that the property is safe or unsafe to occupy. [1] [2]
Sampling is not necessary for every visible mold concern. EPA notes that visible mold growth often does not require sampling. The decision to test should be tied to the question being investigated rather than treating testing as an automatic step for every property. [1]
Questions about mold testing in Aventura?
Tell us what you have noticed at your property. We can discuss the inspection scope and provide a quote before an appointment is confirmed.
Explore mold inspections and testing or Kerwin’s Aventura service-area page. An inspection request is not a confirmed appointment.
Request an inspection